OEC Electronic Communication Systems

Motorola ATEX Radios

Motorola MOTOTRBO DP4401Ex DMR Portable Radio

The Motorola MOTOTRBO DP4401Ex is an ATEX/IECEx-approved professional DMR portable radio. With no display and simple controls, it was developed for voice and data communications in hazardous work areas.

Digital battery life
up to 19 hours in the 5/5/90 conventional test with GPS and option board disabled; actual usage varies.
PRODUCT IMAGEOEC
Motorola MOTOTRBO DP4401Ex DMR Portable Radio
Motorola MOTOTRBO DP4401Ex DMR Portable Radio

PRODUCT OVERVIEW

The right choice for your operation.

DP4401Ex is assessed for team communication in refinery, chemical, energy and appropriately classified industrial workplaces. The manufacturer's European document specifies 64 channels and 4 zones for this model. The full label, frequency version, battery and certification scope of the device to be used must be checked together with the conditions of the work area.

DMR voice and data, built-in GPS, Intelligent Audio and an emergency control support field communications. Lone Worker or Man Down alerts are configured together with the software used and the organization's alarm response process. A location receiver alone does not provide mapping software for the command centre or an incident management service.

ATEX suitability is not assessed based on device colour or family name. The gas, dust and mining markings specified on this page are taken from the manufacturer's European DP4000 Ex document; different approval versions such as Ma/M1 are not combined with this model. The battery, antenna, microphone and carrying accessory must comply with the approved combination. Charging must take place only in environments and conditions permitted by the manufacturer.

TECHNICAL INFORMATION

Specifications at a glance.

Technical information and operating conditions for this model.

Motorola MOTOTRBO DP4401Ex DMR Portable Radio
VHF136–174 MHz; UHF B1: 403–470 MHz.
RF output power1 W.
Technical information64 channels; 4 zones.
Technical informationNo-display design; 3 programmable keys.
Technical information138,5 × 56,7 × 37,8 mm and 455,5 g with Li-ion battery.
Nominal supply7,4 V; manufacturer battery code NNTN8359.
Technical informationBuilt-in GPS; rated audio output 0,5 W.
ATEX gasII 2G Ex ib IIC T4 Gb.
ATEX dustII 2D Ex ib IIIC T130 °C Db.
Mining classification specified in the documentI M2 Ex ib I Mb; not offered as a Ma/M1 version.
Technical informationDevice protection IP67; the manufacturer separately describes protection under ATEX/IECEx test conditions as IP64.
Operating temperature-20 °C to +55 °C.
Digital battery lifeup to 19 hours in the 5/5/90 conventional test with GPS and option board disabled; actual usage varies.

ACCESSORIES AND SETUP

Accessories and installation scope.

Only Ex battery and accessory combinations approved by the manufacturer for this device are selected. The NNTN8359 battery, compatible ATEX audio accessory and correct frequency antenna are matched to the exact device label. A standard microphone with the same connector or a different battery does not automatically maintain ATEX compliance. MED/SOLAS coverage for UHF devices is checked separately against the exact hardware and relevant approval document.

Read the product document

APPLICATIONS

Applications for your operation.

Assess the application, operating conditions and workflow.

Images illustrate the application areas.

COMMON QUESTIONS

Frequently asked product questions.

Concise answers about the product and its operating conditions.

Have another question?
Are the DP4401Ex and DP4801Ex offered as a single series product?

No. They are separate products. The DP4401Ex has no display and 64 channels; the DP4801Ex offers a colour display, full keypad and 1000 channels.

Is ATEX compliance maintained with every Motorola accessory?

No. The approved combination of device, battery, antenna and accessory, and the certificate conditions, must be verified together.

Is this listing for the Ma/M1 mining version?

No. This listing is for the standard Ex model specified as I M2 in the manufacturer's document. Ma/M1 versions are separately approved hardware.

Why do IP67 and the IP64 in the ATEX document differ?

The manufacturer specifies general device durability as IP67 and the approved protection description under ATEX/IECEx test conditions as IP64. The two specifications have different test scopes.

Can it be charged inside an explosive atmosphere?

This page does not grant such permission. The charger, location and charging conditions must comply with the manufacturer's safety and certification instructions.

Chat on WhatsApp